d ru c k p f s[pa]f r rho = 1 ,2 k g /m^3 q v [ m 3 /h ] 9 0 0 8 0 0 7 0 0 6 0 0 5 0 0 4 0 0 3 0 0 2 0 0 1 0 0 0 q v [ c fm ] 5 5 0 5 0 0 4 5 0 4 0 0 3 5 0 3 0 0 2 5 0 2 0 0 1 5 0 1 0 0 5 0 0 ] a p [ s f p 5 0 0 4 8 0 4 6 0 4 4 0 4 2 0 4 0 0 3 8 0 3 6 0 3 4 0 3 2 0 3 0 0 2 8 0 2 6 0 2 4 0 2 2 0 2 0 0 1 8 0 1 6 0 1 4 0 1 2 0 1 0 0 8 0 6 0 4 0 2 0 p fs _ e[i n h2o] 2 1 ,9 1 ,8 1 ,7 1 ,6 1 ,5 1 ,4 1 ,3 1 ,2 1 ,1 1 0 ,9 0 ,8 0 ,7 0 ,6 0 ,5 0 ,4 0 ,3 0 ,2 0 ,1 ] a p [ s f p 2 3 4 highlights: C backward curved C 7-blade impeller, single phase motor C thermal overload protector (top) wired internally C mounting position: any C condensate discharge holes: none C ingress protection of ip44; dependent on installation and position material: fiberglass reinforced composite impeller: pa direction of rotation: clockwise, seen on rotor ac centrifugal fans - radical ? series r2e220 ra ?220 mm (1) nominal data at operating point with maximum load. nominal data air fow nominal voltage hertz ball bearings power input speed (1) temperature range (1) mass ingress protection rating capacitor ul type cfm vac watts rpm o c g f R2E220-RA44-14 529.7 115 50/60 yes 108 2,100 -25...60 1,300 ip44 8 yes r2e220-ra38-13 541.5 230 50/60 yes 107 2,050 -25...60 1,300 ip44 2 yes 1 2 3 4 5 6 7 8 9 10 11 12 a a a a a a a a a a a a 13 14 15 16 a a a a 1 2 3 4 5 6 7 8 9 10 11 12 a a a a a a a a a a a a 13 14 15 16 a a a a measurement: lu-130009 a ir performance measured as per: iso 5801, installation category a, without protection against accidental contact. suction-side noise levels: l w a as per iso 13347, l p a measured at 1m distance to fan axis. the values given are valid under the measuring conditions mentioned and may vary accoring to the actual installation situation. with any deviation to the standard set-up, the specifc values have to be checked and reviewed once installed or ftted. for detailed information on the measuring set-up, please contact ebm-papst. R2E220-RA44-14 curves n rpm p e w i a (115v) l w a db(a) 2455 92 0.81 69 2260 98 0.85 62 2100 100 0.88 60 2265 96 0.84 65 curves
?6.3 ( 161 ) ?6.10 ( 155 ) ?8.66 ( 220 ) 2.80 ( 71 + 1 ) accessory part: inlet nozzle 09609-2-4013, not included in the standard scope of delivery 2.28 ( 58 + 0.2 ) connection line pfa 4g 0.5mm 2 , 4x brass lead tips crimped ?9.53 ( 170 ) ?1.06 ( 27 + 0.1 ) 0.08 ( 2 ) 2.51 ( 63.7 ) ?0.27(5.5) 4x depth of screw max. 5mm 0.08 ( 2 ) ?9.92 ( 170 ) 0.24 ( 6 ) 3.35 ( 85 + 10 ) 17.72 ( 450 + 20 ) r2e220-raxx-xx 1 2 3 4 5 6 7 8 9 10 11 12 a a a a a a a a a a a a 13 14 15 16 a a a a 1 2 3 4 5 6 7 8 9 10 11 12 a a a a a a a a a a a a 13 14 15 16 a a a a b b b b d ru c k p f s[pa]f r rho = 1 ,2 k g /m^3 q v[m^3/h] 9 5 0 9 0 0 8 5 0 8 0 0 7 5 0 7 0 0 6 5 0 6 0 0 5 5 0 5 0 0 4 5 0 4 0 0 3 5 0 3 0 0 2 5 0 2 0 0 1 5 0 1 0 0 5 0 0 q v[cf m ] 5 5 0 5 0 0 4 5 0 4 0 0 3 5 0 3 0 0 2 5 0 2 0 0 1 5 0 1 0 0 5 0 0 ] a p [ s f p 5 0 0 4 8 0 4 6 0 4 4 0 4 2 0 4 0 0 3 8 0 3 6 0 3 4 0 3 2 0 3 0 0 2 8 0 2 6 0 2 4 0 2 2 0 2 0 0 1 8 0 1 6 0 1 4 0 1 2 0 1 0 0 8 0 6 0 4 0 2 0 0 p fs _ e[i n h2o] 2 1 ,9 1 ,8 1 ,7 1 ,6 1 ,5 1 ,4 1 ,3 1 ,2 1 ,1 1 0 ,9 0 ,8 0 ,7 0 ,6 0 ,5 0 ,4 0 ,3 0 ,2 0 ,1 0 ] a p [ s f p 1 2 3 4 2450 102 0.46 69 2220 106 0.46 62 2050 107 0.47 60 2215 105 0.46 65 measurement: lu-136805 a ir performance measured as per: iso 5801, installation category a, without protection against accidental contact. suction-side noise levels: l w a as per iso 13347, l p a measured at 1m distance to fan axis. the values given are valid under the measuring conditions mentioned and may vary accoring to the actual installation situation. with any deviation to the standard set-up, the speci c values have to be checked and reviewed once installed or tted. for detailed information on the measuring set-up, please contact ebm-papst. r2e220-ra38-13 curves n rpm p e w i a (230v) l w a db(a)
|
